Advertisement
Nail Treatment
Manicure
Fill the nail spa with warm water, turn on and place your finger nails in the water.
Keep your fingers in the warm water for at least 3 – 5 minutes. Remove your
fingers from the nail spa and dry them. Select the attachment of your choice and
begin filing and buffing. Once you have finished, rinse your fingers in warm water.
After drying them, use the cuticle accessory to push the cuticles back, and tidy
your nail bed.
Select the desired attachment to tidy the edges of your nails. Run the fine grain
cone around the edge of your nails to smooth any sharp edges.
Rinse off your nails, dry them and apply hand cream or moisturizer.
Filing
Attach the silver filing disc attachment to the styling wand. Switch the wand on and
file your nails using small circular movements. Make sure you file the nail in one
direction.
To finish, buff your nail with the polishing disc, ensuring a smooth shiny finish.
If you have grooves and cracks in the nail you can make the surface smoother
using the polishing disc. Be careful not to file away too much of the nail surface.
To remove calloused and hardened skin, use one of the callous files, by slowly
moving it evenly over the calloused area.
Pedicure
First soak your feet in warm water for a few minutes and then dry them.
Before filing your toe nails, it is best to separate your toes using a wad of cotton
wool between each toe.
Filing and polishing is the same for the toes as for the fingernails.
Nail Dryer
Place your polished nails, one hand at a time in to the nail dryer, and turn on. The
ON/OFF switch is located next to the adaptor outlet.
The blue light will come on and your nails will start to dry. Keep your nails in the
nail dryer for approximately 5 minutes.
UV Light
The UV light has 2 functions:
-
It provides a light.
-
The UV light kills certain bacteria.
Care and Maintenance
1. Switch the unit off, unplug it and let it cool down.
2. Wipe the body of the main unit and the wand with a soft damp cloth. If
necessary use a little washing-up liquid.
3. Remove deposits from the inlet grille by brushing with a soft brush.
4. Do not immerse the appliance in water or any other liquid.
5. Do not use harsh or abrasive cleaning agents or solvents.
Advertisement
