Location And Function Of Parts And Controls; Front - Sony UP-D70XR Instructions For Use Manual

Location and Function of Parts and Controls

Front

1 UPOWER switch
Press to turn the printer on or off.
2 Fan cover (9, 32)
Provided to prevent the printer from dust.
3 Ribbon door (15)
Pull the tab (marked with PULL) on the top
on the ribbon door to open it when loading an
ink ribbon cassette.
4 PRINT QTY (quantity) button (23)
Press this button to display or close the print
quantity setting menu in the printer window
display.
5 Printer window display
Displays the status messages. In menu
operation, the PRINT QTY (print quantity
setting) menu, COLOR ADJUST (printout
adjust) menu, GRAY ADJUST (gray balance
adjust) menu, GAMMA ADJUST (gamma
curve selection) menu or MARGIN PRINT
(margin print setting) menu is displayed.
Also, SCSI device type is dipslayed.
If an error occurs, a corresponding error
message is displayed.
6
Introduction
For details, refer to the pages indicated in parentheses.
6 ALARM indicator (35)
Lights in orange when the ink ribbon or print
paper is exhausted, the paper jams, or another
problem occurs.
7 MENU button (13, 24, 26, 28, 29)
Press this button to display or close the
PRINT QTY, COLOR ADJUST, GRAY
ADJUST, GAMMA ADJUST or MARGIN
PRINT menu.
8 Cursor control buttons (13, 23, 24, 26,
28, 29)
Use these buttons to increase or decrease a
value and level shown on the menu, or scroll
up and down through a menu.
9
STOP button (21)
Press this button to stop printing part-way.
0
PRINT button (20, 21, 23)
Press this button to print the image data stored
in the memory of the printer.
!¡ Paper cover (9)
Printouts are ejected here.
!™ Paper tray (9)
Load print paper here. Press the point marked
with PUSH to remove the paper tray.