Sony UP-D70XR Instructions For Use Manual page 16

Before Printing (Continued)
16
Operation
5
Remove any slack from the ink ribbon.
If the ribbon is left slack, it may be crumpled and damaged when inserted.
"Start" position marker
6
Insert the ink ribbon cassette firmly until it stops.
7
Close the ribbon door.
If your ink ribbon should tear
Repair the tear with transparent tape. There should be no problem with using the
remaining portion of the ribbon.
Transparent
tape
Notes When storing ink ribbons
• Avoid placing the ink ribbon in a location subject to:
– high temperatures
– high humidity
– excessive dust
– direct sunlight
• Store partially used ink ribbon in its original package.
Wind the spool until the "Start" position
marker faces upward.
SONY mark faces forwards.
Remove any slack.