Sony UP-D70XR Instructions For Use Manual page 32

Precautions (Continued)
Cleaning the filter
32
Others
Ventilation holes are provided to prevent the unit from overheating on the left side
and the rear of the printer.
When the message "CLEAN FAN FILTER" appears on the printer widow display,
the filter of the ventilation holes on the left side has become dirty.
To clean the filter, proceed as follows.
1
Remove the fan cover, then filter.
Filter
Fan cover
2
Clean the fan using the vacuum cleaner and the like.
Notes
• Be careful that the filter will be caught in the cleaner.
• Do not rub the net of the fan strongly.
3
Reset the filter and the fan cover on the side panel as they were.