Location And Function Of Parts And Controls; Front - Sony UP-D2600 Instructions For Use Manual

Location and Function of Parts and Controls

Front

1
POWER switch (18)
Press to switch the unit on or off. The POWER
lamp lights green when the power is on.
2
Top cover (26)
Usually do not open this cover. Only in case
the paper has jammed inside the top cover,
open the top cover to remove a jammed paper.
If you open the top cover, there is the other
black cover inside. Open this black cover, too.
Pay the following attention when opening the
top cover.
Be sure to turn off the power of the printer
before opening the top cover.
If not, since the rubber roller is moving part,
jewelry, lose cloth, hair and similar may be
caught by the moving roller.
3 PRINT indicator (18, 24)
Lights while printing.
Blinks while the printer is receiving data.
8
Introduction
For details, refer to the pages given in parentheses.
4
ALARM indicator (18, 24)
Lights in case of paper jamming or occurrence
of any other problem.
5
RIBBON indicator (18, 24)
Lights when a problem for ink ribbon
cartridge occurs.
6
PAPER indicator (18, 24)
Lights when a problem for paper occurs.
The printer allows you to check the printer
operating condition according to the lighting
conditions of the PRINT indicator, ALARM
indicator, PAPER indicator and RIBBON
indicator.
For details, see "Indicators on the Front Panel"
on page 24.