ZyXEL Communications Prestige 28641 User Manual page 134

1. To get to the System Status, select option 24. System Maintenance.
2. From this menu, select option 1. System Status.
3. There are four (4) possible commands in Menu 24.1 - System
4. Items 5 - 26 describes the fields present in Menu 24.1 - System
5. ISDN - shows statistics for B1 and B2 channels respectively.
6. Link - shows the Remote Node the channel is currently connected
7. Type - the current connecting speed (56K or 64K).
8. TXPkt - the number of transmitted packets on this channel.
9. RXPkt - the number of received packets on this channel.
120 System Maintenance
Figure 14-2 Example of Menu 24.1 - System Maintenance - Status
This will bring you to Menu 24 - System Maintenance.
Maintenance - Status. Entering 1 will disconnect the current B1
channel call; 2 will disconnect the current B2 channel call, 3 will
reset the counters; and ESC will exit this screen.
Maintenance - Status. It should be noted that these fields are
READ-ONLY and are meant to be used for diagnostic purposes.
These are the information displayed for each channel:
to or the status of the channel (Idle, Calling, or Answering).