ZyXEL Communications Prestige 28641 User Manual page 58

1. From the Main Menu, enter 4 to go to Menu 4 - Internet Access
2. ISP's Name - Enter the name of your Internet Service Provider,
3. ISP IP Addr - Enter the IP Address of the remote gateway at the
4. Pri(mary) Phone # and Sec(ondary) Phone Number - Both the
5. My Login Name - Enter the login name given to you by your ISP.
6. My Password - Enter the password associated with the login name
44 Configuring for Internet Access
Figure 4-2 Menu 4 - Internet Access Setup
Setup as seen above.
e.g., myisp. This information is for identification purposes only.
ISP's site. If you do not have this data, just leave it blank.
Primary and the Secondary Phone number refer to the number that
the Prestige will dial to connect to the ISP. The Prestige will always
call your ISP using the Primary Phone number first. If the Primary
Phone number is busy or does not answer, the Prestige will call the
Secondary Phone number if available. Once connected, the Prestige
will use the BACP (Bandwidth Allocation Control Protocol) to
establish the second B-channel if PPP/MP is enabled, and the ISP
also supports MP and BACP.
above. Note that this login name/password pair is only for the
Prestige to connect to the ISP's gateway. When you use TCP/IP