ZyXEL Communications Prestige 28641 User Manual page 116

13. More - In this field, you can determine if you want to pass the
14. Log - In this field, you can determine if you wish to log the results of
15. Action Matched - If the conditions for the filter rule are met, you
16. Action Not Matched - If the conditions for the filter rule are not
102 Filter Configuration
Yes - filter match only established TCP connections.
No - filter match both initial and established TCP connections.
packet through the next filter rule before an action is taken. There
are two options for this field:
Yes.
No.
If More is Yes, then Action Matched and Action Not Matched will
be N/A.
packets attempting to pass the filter rule. These results will be
displayed on the System Log (see Chapter 14). There are 4 options
for this field:
None - No packets will be logged.
Action Matched - Only packets that match the rule parameters
will be logged.
Action Not Matched - Only packets that do not match the rule
parameters will be logged.
Both - All packets will be logged.
can specify what to do with the packet. There are three options for
this field:
Check Next Rule.
Forward.
Drop.
met, you can specify what to do with the packet. There are three
options for this field: