ZyXEL Communications Prestige 28641 User Manual page 74

5. Multiple Link Options: Max Trans Rate - Enter the maximum
6. Multiple Link Options: Target Utility - Enter the two thresholds
7. Multiple Link Options: Add Persist - This parameter specifies
8. Multiple Link Options: Subtract Persist - This parameter
Once you have completed Menu 11.2 - Remote Node PPP Options,
press ENTER at the message: Press ENTER to Confirm ... to confirm
your selections, or press ESC to cancel your selections.
60 Remote Node Configuration
data transfer rate allowed for this Remote Node. This parameter is
in kilobits per second. There are two options for this field:
64 - At most one channel can be used.
128 - A maximum of two channels can be used.
separated by a - for subtracting and adding the second channel. The
default is 32-48.
the number of seconds there traffic is above the adding threshold
before the Prestige will bring up the second channel. The default is 5
seconds.
specifies the number of seconds where traffic is below the
subtraction threshold before the Prestige drops the second channel.
The default is 5 seconds.