ZyXEL Communications Prestige 28641 User Manual page 44

1. System Name - Choose a descriptive name for the Prestige for
2. Location - Enter the geographic location (up to 31 characters) of
3. Contact Person's Name - Enter the name (up to 8 characters) of
4. Protocols - Turn on or off the individual protocols for your
30 Installation
Figure 3-6 Menu 1 - General Setup
identification purposes, e.g., p2864. This name should be no more
than 8 alphanumeric characters. Spaces are not allowed, but "-"
and "_" are accepted. This name can be retrieved remotely via
SNMP, used for CHAP authentication, and will be displayed as the
prompt in the Command Mode. See Chapter 6 for more
information on CHAP; see Chapter 14 for more information on
Command Mode.
your Prestige, e.g., San Jose.
the person in charge of this Prestige, e.g., Brent Harper. The
Location and the Contact Person fields are optional.
particular application. Unsupported protocols will have a N/A in
their fields.