Programming Information Tables - DoorKing 1838 Installation & Owner's Manual

Complete the information in the tables on the following pages to maintain a record of the information that has been
programmed into the 1838 if the system IS NOT being programmed from a PC. If PC programming is being utilized, there is no
reason to maintain these log sheets since the PC will maintain a complete record of the information that has been programmed.
Make copies of the resident log sheet (section 7.2) so that you have enough to complete a listing of all residents and data. Enter
the information as shown in the example below.
AAC stands for Alternate Area Code. Enter the alternate area code number if alternate area codes have been programmed and
assigned to this resident (section 3.5.3).
DIRECTORY CODE is the resident's unique directory code. It can be 1 to 4 digits (section 3.5.1).
ENTRY CODE is the resident's four-digit entry code (section 3.7.1) if they are used.
DEVICE CODE is the resident's unique device code (section 3.6.1) if access control devices (Transmitters, cards, etc.) are used.
ELEVATOR USE ONLY (Remote Account Manager Software MUST be used):
SEC LEVEL (Security Level).
FL (Floor).
ER (Elevator Reference Number).
Resident Log Sheet Example
Name
Smith, John

7.1 Programming Information Tables

Master Code (section 3.2.1)
1st Digit 2nd Digit
Tone Open Numbers
Momentary Activation
Relay Hold OPEN
Relay RELEASE
Relay Hold OPEN 1 Hour
Entry Code Ranges
Low Boundary
High Boundary
Postal Lock Activates (section 3.3.4)
Relay 0 Relay 1
7.1.1 10 Area Codes
Pointer Area Code
1
2
50
SECTION 7 - LOG TABLES
AAC PHONE NUMBER
3 765-0000
3rd Digit 4th Digit
(section 3.3.3)
(section 3.7.3)
Note: Requires Postal
Lock Box connected to
Relay 2
main terminals 4 and 6.
See sections 1.4 and 2.3.
Area Code Pointers - System Set to 10 Area Codes (section 3.5.3)
Pointer Area Code
3
4
DIRECTORY CODE ENTRY CODE
173 3812
Relay 0 Relay 1
Relay 0 Relay 1
Pointer Area Code Pointer
5
6
DEVICE CODE SEC LEVEL
04231 02
Relay Strike Time (section 3.3.1)
Relay 0 Relay 1
Relay 2
Relay 2
Rotary "9" Activates (section 3.3.6)
Relay 0 Relay 1
Area Code Pointer
7 9
8 0
ELEVATOR USE
FL ER
14 2
Relay 2
Relay 2
Area Code
1838-065 Issued 3-19
Version D