Important Information For Owner; Shut-Off Power To Operator Or Shut-Off Alarm - DoorKing 4302 Owner's Manual

IMPORTANT INFORMATION FOR OWNER

Shut-Off Power to Operator OR Shut-Off Alarm

36
OB
CB
SW1
Open
GND
Beam
Close
GND 1476-010
Beam
Not Used
Not Used
Relay N.O.
Relay COM
24 V NEG
24 V POS
Solar POS
Solar NEG
FULL
OPEN
PUSH TO OPERATE PUSH
technician use only tec ON
1 2 3 4 5 6 7 8
OFF
Push reset button to SHUT-OFF alarm.
ALWAYS inspect the gate, gate hardware
and any obstructions along the gate's
path that could have activated the alarm
BEFORE pressing the reset button and
putting the gate back into service. If the
gate is malfunctioning, DO NOT put it
back into service until the problem can
be corrected.
B
4302-018
9 10 11 12 13 14 15 16 17 18 19 20
Turn OFF power
switch to shut-off
power to operator.
Note: Turning OFF
power will also
shut-off alarm and
reset it when
alarm has been
activated.
4302-067-G-2-21