Global Vlan1Q Tagged Vlan Configuration Commands; Garp Status; Garp Timer; Figure 130 Cpu Vlan Configuration And Activation Example - ZyXEL Communications ES-2108 User Manual

Figure 130 CPU VLAN Configuration and Activation Example

ras (config)# vlan 3
ras (config-vlan)# inactive

29.4 Global VLAN1Q Tagged VLAN Configuration Commands

This section shows you how to configure and monitor the IEEE 802.1Q Tagged VLAN.

29.4.1 GARP Status

Syntax:
This command shows the switch's GARP timer settings, including the join, leave and leave all
timers.
An example is shown next.

Figure 131 GARP STATUS Command Example

ras # show garp

GARP Timer

------------------------
Join Timer = 200
Leave Timer = 600
Leave All Timer = 10000
ras#
29.4.2 GARP Timer
Syntax:
where
join <msec>
Chapter 29 IEEE 802.1Q Tagged VLAN Commands
show garp
garp join <msec> leave <msec> leaveall <msec>
= This sets the duration of the Join Period timer for GVRP in
milliseconds. Each port has a Join Period timer. The allowed Join Time
range is between 100 and 32767 milliseconds; the default is 200
milliseconds.
ES-2108 Series User's Guide
189