User Mode; Enable Mode; Table 56 Command Summary: User Mode; Table 57 Command Summary: Enable Mode - ZyXEL Communications ES-2108 User Manual

ES-2108 Series User's Guide

27.9.1 User Mode

The following table describes the commands available for User mode.
Table 56 Command Summary: User Mode
COMMAND
enable
exit
help
history
logout
ping <IP|host-name>
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
help
show ip
system-information
ssh <1|2> <[user@]dest-ip>
traceroute <ip|host-name>
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
help

27.9.2 Enable Mode

The following table describes the commands available for Enable mode.

Table 57 Command Summary: Enable Mode

COMMAND
baudrate <1|2|3|4|5>
boot config
configure
disable
156
DESCRIPTION
Accesses Enable (or privileged) mode. See
on page 156.
Logs out from the CLI.
Displays help information.
Displays a list of previously command(s) that you have
executed. The switch stores up to 256 commands in
history.
Exits from the CLI.
Sends Ping request to an Ethernet device.
Sends Ping request to an Ethernet device in the specified
VLAN(s) with the specified parameters.
Displays command help information.
Displays IP related information.
Displays general system information.
Connects to an SSH server with the specified SSH version.
Determines the path a packet takes to a device.
Determines the path a packet takes to a device in a VLAN.
Displays command help information.
DESCRIPTION
Changes the console port speed. Choices
are 1 (9600), 2 (19200), 3(38400), 4
(57600) and 5 (115200).
Restarts the system.
Accesses Configuration mode. See
Section 27.9.3 on page
Exits Enable (or privileged) mode.
Chapter 27 Introducing the Commands
Section 27.9.2
159.