Show Ip; Show Logging; Figure 102 Show Ip Command Example - ZyXEL Communications ES-2108 User Manual

ES-2108 Series User's Guide

28.2.2 show ip

Syntax:
This command displays the IP related information (such as IP address and subnet mask) on all
switch interfaces.
The following figure shows the default interface settings.

Figure 102 show ip Command Example

ras> show
IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1]
ras>

28.2.3 show logging

Note: This command is not available in User mode.
Syntax:
This command displays the system logs. The following figure shows an example.
172
show ip
ip
show logging
Chapter 28 Command Examples