Figure 27 System Info (Es-2108Pwr); Table 8 System Info - ZyXEL Communications ES-2108 User Manual

ES-2108 Series User's Guide

Figure 27 System Info (ES-2108PWR)

The following table describes the labels in this screen.

Table 8 System Info

LABEL
System Name
ZyNOS F/W
Version
Ethernet
Address
Hardware Monitor (The following hardware monitoring information is only available on the ES-
2108PWR.)
Temperature
Unit
Temperature
Current
MAX
MIN
Threshold
Status
62
DESCRIPTION
This field displays the descriptive name of the switch for identification purposes.
This field displays the version number of the switch 's current firmware including the
date created.
This field refers to the Ethernet MAC (Media Access Control) address of the switch.
The switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit
(Centigrade or Fahrenheit) in this field.
CPU, MACand LOCAL refer to the location of the temperature sensors on the switch
printed circuit board.
This field displays the current temperature measured at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Error for those
above.
Chapter 7 Basic Setting