Power Terminal; Power Connection - B2 Audio RAGE 1200.2 User Manual

Power terminals
rage 1200.2
GND REM +12 V

power terminal

GND (Ground connection)
Connects to the vehicle's chassis. Keep as short as
possible (< 20" / 50 cm). Use minimum 0AWG cable
for optimal operation.
rem (remote connection)
Run a remote turn on cable from the switched +12V source.
This may be a toggle switch, a relay, the source unit's remote ouput cable or power antenna trigger cable.
Connect the remote turn on cable to the power terminal labeled as REM.
+ - + -
L-CH R-CH
BRIDGED
100 A fuse rating
17.5V
rage 1200.4
GND REM +12 V
+12v (Power connection)
Connects to the positivie terminal of the battery.
For speci ed performance 0AWG cable is required.
Fuses shall be placed within 8" / 20 cm of the battery.
5
1CH - 2CH + 3CH - 4CH +
1CH + 2CH - 3CH + 4CH -
BRIDGED BRIDGED
100 A fuse rating