Parts Description - Powerfix Profi 282485 Operation And Safety Notes

Furniture transport set
Introduction
Congratulations on the purchase of your
new product. You have selected a high
quality product. Familiarise yourself with
the product before using it for the first time. To help
you do this, please read the accompanying operat-
ing instructions. Only use the product as described
and for the indicated purpose. Save these instructions
for use. When passing this product on to others,
please also include all the documents.
Intended use
Use the furniture transport kit to raise furniture and
place it on the rolling base. You can then easily
transport the furniture for short distances.
The furniture transport kit is not intended for commer-
cial use. Only use the furniture transport set on even
surfaces.
The manufacturer is not liable for damage caused
by improper or incorrect use.

Parts description

Swivel head
1
Lever arm
2
Handle
3
Rolling base
4
Swivel base
5
Technical Data
Weight capacity per rolling base:
Lever arm weight capacity:
Weight:
282485_pow_Moebeltransport-Set_content_HU_SI_SK.indd 5
Scope of delivery
Verify the furniture transport kit is complete and
undamaged immediately after unpacking:
1 Lever arm with swivel head
4 Rolling base with swivel base
1 Set of instructions for use
RISK OF INJURY!
Wear safety shoes to prevent injuries caused
by loads tipping.
Tipping loads can cause serious injuries. Ensure
the load being transported cannot tip. Have a
second person assist you. Always move the
load slowly.
Uncontrolled lowering of loads can cause
injuries. Always lower loads slowly.
Only use the lever arm and the four rolling
bases in good condition.
Do not extend the lever arm.
Secure furniture doors from accidentally
opening prior to transport.
Ensure there are no objects blocking the
transport route.
Only use the furniture transport kit on even
surfaces.
Align the rolling bases under the furniture so
the casters point in the same direction.
Do not leave children and persons requiring
supervision unsupervised with the furniture
transport kit. They are not always able to
correctly recognize hazards.
PROPERTY DAMAGE!
Remove the contents from the piece of furniture
150 kg before lifting and transporting.
150 kg Attaching the lever arm incorrectly may damage
approx. 1.1 kg the furniture. Always slide the flexible lever arm
head all the way under the piece of furniture.
Place the four rolling bases under the outside
corners of the piece of furniture. The piece of
furniture should be all the way on the four
roller bases.
Introduction / Safety notices
Safety notices
GB 5
09.12.16 14:45