5.11
Ethernet Mode connector network floating (internal or external network)
Simple schematic network:
•
Internet
Set the meter to Client mode with the following parameters:
•
o
o
o
•
Connect the Ethernet cable to input 3.19 in Fig. 1.
5.12
Ethernet Mode connected via wireless bridge network (external network, fixed IP):
Simple schematic network:
•
Internet
Set the meter to Client mode with the following parameters:
•
o
o
o
•
In the port forwarding settings of your IP router, you can set the parameters for SSID,
IP address and port such as in Image 8.
Connect the Ethernet cable to input 3.19 in Fig. 1.
•
5.13
Ethernet Mode connected via wireless bridge network (external network, floating
IP):
Simple schematic network:
•
Internet
•
Set the meter to Client mode with the following parameters:
o
o
o
•
In the port forwarding settings of your IP router, you can set the parameters for SSID,
IP address and port such as in Image 8.
Apply for a free address at www. Dlinkddns. com. The name of the application will be
•
transferred to the address input of your IP Router (Image 9)
If the Metro App is being used, the required parameters in Image 4 should be entered using
•
IP Tools.
Connect the Ethernet cable to input 3.19 in Fig. 1.
•
Modem
IP: 192.168.0.254
Port: 200
Gateway: 192.168.0.1
Modem
IP: 192.168.0.254
Port: 200
Gateway: 192.168.0.1
URL Forwarding
Server
IP: 192.168.0.254
Port: 200
Gateway: 192.168.0.1
IP Router LAN Port
IP Router LAN Port
Modem
Wireless
(Bridge)
© PCE Instruments
12
PCE-HT 120
PCE-HT 120
IP Router
PCE-HT 120
Wireless
(AP)