Table of Contents
Advertisement
Turn Pump Power On/Off (Figure 1)
Turn on: Remove the tamper-resistant cover. Move the on/off switch to ON.
Turn off: Move the on/off switch to OFF.
Use the Pump with AC Power (Power option in non-hazardous locations)
Do not use the pump with the Battery Eliminator in hazardous locations. UL Listing for intrinsic safety is not in effect during pump
operation with Battery Eliminator.
The Battery Eliminator is an accessory that converts alternating current (AC) to direct current (DC) from which the pump can be
operated for extended runs. The Battery Eliminator should be used in non-hazardous locations only. See Accessories.
1.
Remove the battery pack from the pump (see Replace the Battery Pack). The Battery Eliminator is comprised of two pieces, a wall cube
and a power adapter.
2.
Plug the wall cube into a standard wall outlet and insert its plug end into the power adapter.
3.
Fit the power adapter on the pump in place of the battery pack.
www.skcinc.com
Form 37711 Rev 1809
Page 3 of 14
Advertisement
Table of Contents
Need help?
Do you have a question about the 224-44XR and is the answer not in the manual?