Gewiss GW 10 793 Manual page 38

GENERAL DESCRIPTION
Setting the operation mode
• from the bus with separate 1 bit objects (OFF, ECONOMY, PRECOMFORT, COMFORT);
• from the bus with 1 byte objects.
Temperature reading
• with integrated sensor or temperature probe;
• mixed with definition of the relative weight.
Temperature control in zones
• with operating mode received from the master device and using room set points;
• with set point value received from the master device and room temperature differential.
Scenes
• memorising and activating the 8 scenes (value 0..63).
Other functions
• setting of the (OFF, ECONOMY, PRECOMFORT, COMFORT) set point by the bus;
• setting the function type (heating/air conditioning) by the bus;
• transmission to the bus of the status information (mode, type), the temperature reading
and current set point;
• management of status information sent from the controlled actuator;
• window status signal management to temporarily turn off the thermostat.
The device is installed on the wall using the supplied flange that can be fixed to the wall
using dowels or screwed onto a round or square flush-mounted box.
38