ZyXEL Communications omni.net LCD+M Technical Reference page 143

All the Following Commands Require a 'AT' Prefix
AT Com. Options
P4 AT&T custom point-to-point
P5 AT&T custom point-to-multipoint (1 SPID)
P6 AT&T custom point-to-multipoint (2 SPID)
Qn n=0-2 Result code displayed
Q0 (*) omni.net returns result code.
Q1 omni.net does not return result code.
Q2 omni.net returns result code but quiet after answering on a RING.
(will not show in AT&Vn)
QPn n=1-3
QP1 Display the setting of quick dial (speed dial) numbers.
QP2 Display the call-out history.
QP3 Display the call-in history.
Sr.b=n Set bit 'b' of S-register 'r' to value 'n'.
'n' is a binary digit '0' or '1'.
Sr.b? Display value of bit 'b' of S-register 'r'
Sr=n
Set S-register 'r' to value 'n'.
'n' must be a decimal number between 0 and 255.
Sr? Display value stored in S-register 'r'.
SD? Display current Date of omni.net LCD.
SD=yyyy/mm/dd Set Date of omni.net LCD.
(Note: yyyy:year, mm:month, dd:day)
ST? Display current Time of omni.net LCD.
ST=hh:mm:ss Set Time of omni.net LCD.
(Note: hh:hour, mm:munite, ss:second)
SPIDr=nnn... User enters Service Profile ID 'nnn' (SPID), (USA only).
SPID0 First SPID number.
SPID1 Second SPID Number, if any.
SPID? Display the SPID setting(s), (USA only).
SWR Software reset
Technical Reference for ZyXEL omni.net series
Function & Description Reference
S23b7
S40b1
S38b2
A-9