Extended 'At*' Command Set - ZyXEL Communications omni.net LCD+M Technical Reference

Technical Reference for ZyXEL omni.net series

Extended 'AT*' Command Set

AT Com. Options
*Cn Character length, including start, stop and parity bit.
*C0 (*) DTE port 10-bit character length.
*Dn n=0-39 Set default dial pointer at telephone directory location 'n'.
*D0 (*) (See also S35b4 and S38b0)
*Gn Security function selection.
*G0 (*) Disable security function.
*G1 Enable type 1 security, with password check (Proprietary).
*G2 Enable type 1 security, with password check and call back
(Proprietary).
*G3 Enable type 2 security, with password check.
*G4 Enable type 2 security, with password check and call back.
*G5 Enable type 2 security, with password check and call back,
remote site enters the call back number.
*GCn
n=0-1 Call-back function selection.
*GC0 (*) Disable call-back function.
*GC1 Enable call-back function.
*HCn
n=0-4 Assign call-back phone number, 's' to storage location, 'n'.
*Hn
n=0-39 Modify user password table at location 'n'.
*HS Modify supervisory password (Default:: See User's Manual)
*T Recall the last CND (Caller ID) information.
*V View the password table.
*VC View the call-back number table.
Fax *VC View the call-back number table.
Table 71. Extended 'AT*' Command Set
A-16
All the Following Commands Require a 'AT' Prefix
Function & Description Reference
S15b3-4
S29
S36b5-7
S119b0