ZyXEL Communications omni.net LCD+M Technical Reference page 138

Technical Reference for ZyXEL omni.net series
AT Com. Options
B40 PPP async-to-sync conversion.
B41 SLIP to sync HDLC conversion
Multi Auto Dial Out (valid only if S80.6=1)
B42 Eurofile Transfer
B90 PPP+X.75
B91 PPP+X.75+T.70+ISO_8208+T.90+BTX
B92 X.75+T.70+ISO_8208+T.90+BTX+PPP
B93 PPP+V.120
B94 V.120+PPP
B95 PPP+X.75+V.120
B96 PPP+V.120+X.75
B97 X.75+V.120+PPP
BPn n=0-1 Configure PPP BACP/BAP.negotiation
BP0 Disable PPP BACP/BAP.
BP1 (*) Enable PPP BACP/BAP.
CBn n=0-1 Configuration of embedded protocol analyzer (EPA.)
CB0 Disable the capture of B-channel protocols.
CB1 Enable the capture of B-channel protocols.
CCn
n=0-1 Configuration of embedded protocol analyzer.
CC0 Disable the capture of DTE/DCE interface protocols.
CC1 Enable the capture of DTE/DCE interface protocols.
CDn n=0-1 Configuration of embedded protocol analyzer.
CD0 Disable the capture of D-channel protocols.
CD1 Enable the capture of D-channel protocols.
CEn
n=0-1 Call bumping control for PPP/MP.
CE0 Disable the call bumping function.
CE1 (*) Enable the call bumping function.
A-4
All the Following Commands Require a 'AT' Prefix
Function & Description Reference
S122
S84b1
S84b0
S84b2
S85b0