ZyXEL Communications omni.net LCD+M Technical Reference page 172

Technical Reference for ZyXEL omni.net series
S Com. bit dec hex
7
S123= bit dec hex
0 0-3 0-3
0 (*) 0
1 1
2 2
3 3
2-7
S124= dec hex
0-25 0-FF
5
S125= bit dec hex
1-6 0 (*)
7 0 0 (*)
128 80
S126= bit dec hex
0-25 0-FF
5
S127= bit dec hex
0-25 0-FF
5
Notes:
#
In 'Reference' column, 'AT' is omitted when AT command is referred to.
#
+nnn is manufacturer default when listed in 'Reference' column.
#
bit = S-register bit number, 'b', used in 'ATSr.b=n', 'ATSr.b=?'
#
dec = Decimal value, 'x', used in 'ATSn=x'
#
hex = Hex value, used in omni.net LCD model for setting 'STATUS REGISTER' manually from front
panel.
Table 74. Extended S-Registers "ATSn=x"
B-20
All the Following Commands Require a 'AT' Prefix
Function and description
Reserved.
Select Caller ID signaling method.
Country default.
DTMF, prior to ring.
ETS FSK, during ring.
ETSI FSK, prior to ring.
Reserved
Empty IP packet interval for PPP
in units of 1s.
Sub-persist time interval.
S125b1-6 is in Second unit.
S125b1-6 is in Minute unit.
Add-threshold for BOD in Kbps unit
Sub-threshold for BOD in Kbps unit
+Def./Ref.
+000
KSxn
KSSn
KSMn
JAn,+48
JSn,+32