Remote Management Configuration; Remote Management Overview; Remote Management Limitations - ZyXEL Communications Network Adapter P-660RU-T V2 User Manual

C
H A P T E R
This chapter provides information on configuring remote management.

10.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
You may manage your ZyXEL Device from a remote location via:
• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP

10.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:
• You have not enabled that service on the interface in the corresponding remote
management screen.
• The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the ZyXEL Device will disconnect the session immediately.
• There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
• A filter is applied (in the Security screen) to block a Telnet, FTP or Web service.
P-660RU-T v2 User's Guide
Remote Management
Configuration
10
75