Nat; Internet Access Wizard Setup: Second Screen; Figure 7 Internet Connection With Pppoe; Table 5 Internet Connection With Pppoe - ZyXEL Communications Network Adapter P-660RU-T V2 User Manual

Do not specify a nailed-up connection unless your telephone company offers flat-rate service
or you need a constant connection and the cost is of no concern

3.2.3 NAT

NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a
host in a packet, for example, the source address of an outgoing packet, used within one
network to a different IP address known within another network.

3.2.4 Internet Access Wizard Setup: Second Screen

The second wizard screen varies depending on what mode and encapsulation type you use. All
screens shown are with routing mode. Configure the fields and click Next to continue.

Figure 7 Internet Connection with PPPoE

The following table describes the labels in this screen.
Table 5 Internet Connection with PPPoE
LABEL
Service Name
User Name
Password
IP Address
P-660RU-T v2 User's Guide
DESCRIPTION
Type the name of your PPPoE service here.
Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Enter the password associated with the user name above.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the text
box below.
Chapter 3 Wizard Setup
41