Internet Access Wizard Setup: Connection Test; Figure 12 Internet Access Wizard Setup: Lan Configuration; Table 9 Internet Access Wizard Setup: Lan Configuration - ZyXEL Communications Network Adapter P-660RU-T V2 User Manual

Chapter 3 Wizard Setup

Figure 12 Internet Access Wizard Setup: LAN Configuration

The following table describes the labels in this screen.

Table 9 Internet Access Wizard Setup: LAN Configuration

LABEL
LAN IP Address
LAN Subnet Mask
DHCP
DHCP Server
Client IP Pool Starting
Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS
Server
Back
Finish

3.2.7 Internet Access Wizard Setup: Connection Test

The ZyXEL Device automatically tests the connection to the computer(s) connected to the
LAN ports. To test the connection from the ZyXEL Device to the ISP, click Start Diagnose.
Otherwise click Return to Main Menu to go back to the Site Map screen.
46
DESCRIPTION
Enter the IP address of your ZyXEL Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Note: If you changed the
must use the new IP address if you want to access
the web configurator again.
Enter a subnet mask in dotted decimal notation.
From the DHCP Server drop-down list box, select On to allow your ZyXEL
Device to assign IP addresses, an IP default gateway and DNS servers to
computer systems that support the DHCP client. Select Off to disable DHCP
server.
When DHCP server is used, set the following items:
This field specifies the first of the contiguous addresses in the IP address
pool.
This field specifies the size or count of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers are passed to
the DHCP clients along with the IP address and the subnet mask.
As above.
Click Back to go back to the previous screen.
Click Finish to save the settings and proceed to the next wizard screen.
's LAN IP address, you
ZyXEL Device
P-660RU-T v2 User's Guide