Figure 19 Wan Setup (Pppoe); Table 12 Wan Setup - ZyXEL Communications Network Adapter P-660RU-T V2 User Manual

Chapter 6 WAN Setup

Figure 19 WAN Setup (PPPoE)

The following table describes the labels in this screen.

Table 12 WAN Setup

LABEL
Name
Mode
Encapsulation
62
DESCRIPTION
Enter the name of your Internet Service Provider, for example "MyISP". This
information is for identification purposes only.
Select Routing (default) from the drop-down list box if your ISP allows multiple
computers to share an Internet account. Otherwise select Bridge.
Select the method of encapsulation used by your ISP from the drop-down list
box. Choices vary depending on the mode you select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET
ENCAP or PPPoE.
P-660RU-T v2 User's Guide