General Safety Regulations; Safety Devices; Maintenance - Automatic Systems ClearLock 645 User Manual

1.4. General safety regulations

Only special trained and authorised staff can carry out the maintenance service. The manufacturer is not
responsible for any tampering or modification of the system, which has not been previously authorised.
The removal or tampering of safety devices involves the breaking of European regulations concerning safety.
We exhort you to use only original spare parts. Our machines are designed to accept original spare parts only.
Skilled staff must carry out their settings, respecting the instructions hereby. Please, be sure that when the
system operates, all safety conditions are respected. If you notice any irregularities, please stop the system
immediately and call Automatic
Only skilled staff must service the electric system, even if it is of small entity.

1.5. Safety devices

• Manual release of the system in case of total energy absence;
• Internal button of aid call;
• Inaccessible mechanic motion;
• Metal plates showing the correct procedures to be followed;
• Sensitive devices to open in case it is intercepted during the closing phase;
• Electronic couple governor to keep the noticeable thrust on the door;
• Electric isolation;
• Safety transformer;
• Peripheral devices working by SELV.
We remind all of our customers to follow the norms in force, first of all the system's
grounding and safety devices.

1.6. Maintenance

This door has been made in compliance with the regulations in force and taking into account the European
Community Laws.
We exhort you to verify the system every six-months. Only qualified staff must inspect the system. During the
scheduled maintenance, it is necessary to carry out the procedures mentioned in the system's handbook (see
Maintenance - System's handbook).
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose other
than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems.
The document is subject to change without notice.
ClearLock 645
-UM-EN
Systems maintenance service.
p. 5 / 28