Structure And Components; Main Switch And On Switch (Table 01) - Automatic Systems ClearLock 645 Technical Manual

2. STRUCTURE AND COMPONENTS

2.1. Main switch and on switch
4
Inside view with open inspection panel
1) Booth's ON/OFF switch
2) Switch to run booth on batteries.
3) Switch 220 V.
4) Anti accident guard.
5) Battery check stick on.
6) Instructions stick on.
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose other
than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems.
The document is subject to change without notice.
ClearLock 645
-TM-EN
Table 01
3
6
1
2
5
p. 5 / 44