ZyXEL Communications OMNI 56K Plus Series User Manual page 60

Omni 56K Plus Series User's Guide
Enter a descriptive name and select an icon in the Connection Description screen. Click OK to
2.
display the Connect to screen.
Select the COM port to which the modem is connected. Click OK to continue.
3.
In the COM Properties screen, click OK after configuring the following parameters:
4.
VT100 terminal emulation.
19200 Baud. (Default)
No parity, 8 data bits, 1 stop bit, flow control set to none.
5-6 Firmware Upgrade