ZyXEL Communications OMNI 56K Plus Series User Manual page 42

Omni 56K Plus Series User's Guide
COMMAND
+FIS=vr,br,wd,ln,df,ec,bf,st
+FCS=vr,br,wd,ln,df,ec,bf,st Current Session Parameters
+FLI="string"
+FPI="string"
+FLP=n
+FSP=n
+FNR=rpr,tpr,idr,nsr
4-14
Table 4-11 Service Class 2.0 Commands
DESCRIPTION
Page Width
Page Length
Data Compression Format
Error Correction
Binary File Transfer
Minimum Scan Time/Line
Current Session negotiating parameters
Local Facsimile station ID String, TSI/CSI
Local Facsimile station ID String, CIG
Indicate Document available for polling
Enable/Disable polling
Negotiation Reporting Enable
VALUE
wd=0:1728 pixels in 215mm
wd=1:2048 pixels in 255mm
wd=2:2432 pixels in 303mm
ln=0:A4;297mm
ln=1:B4;364mm
ln=2:unlimited length
df=0:1-D
df=1:2-D
ec=0:Disable
bf=0:Disable
st=0:0 ms
st=1:5 ms
st=2:10 ms (normal); 5 ms (fine)
st=3:10 ms
st=4:20 ms (normal); 10 ms (fine)
st=5:20 ms
st=6:40 ms (normal);20 ms (fine)
st=7:40 ms
The same as above
The same as above
n=0:No document
n=1:A document is available
n=0:Disable
n=1:Enable
rpr= 0:Receiver parameters are
not reported.
rpr=1:Receiver parameters are
reported.
tpr= 0:Transmitter parameters are
not reported.
tpr=1:Transmitter parameters are
reported.
idr= 0: ID Strings are not reported.
idr=1: ID Strings are reported.
nsr= 0:Non-standard frames are
not reported.
Command Sets