Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Media and Additional Parts
Description
Parts Catalog
Operator's Manual
Engine Manual
Operator Training Material
Remote control
Note: Determine the left and right sides of the machine
from the normal operating position.
1
Connecting the Battery
Parts needed for this procedure:
A/R
Petroleum jelly (not supplied)
Procedure
1. Remove the clips securing the battery cover to the
battery box
(Figure
Description
Petroleum jelly (not supplied)
Debris blower assembly
Hitch
Bolt (3/8 x 3 inches)
Flange nut (3/8 inch)
No parts required
Handheld remote
AAA batteries
Screws, small
4).
Qty.
A/R
1
1
2
2
–
1
4
6
Qty.
1
Read before operating.
1
1
Use to reference the engine operation and maintenance.
1
View before operating the machine.
1
Use to remotely operate the blower.
1. Battery cover
8
Use
Connect the battery
Mount the hitch to the debris blower
Connect the debris blower to the tow
vehicle
Assemble the handheld remote.
Use
Figure 4
2. Battery clip