Setup; Connecting The Battery - Toro Pro Force 44554 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
Media and Additional Parts
Description
Parts Catalog
Operator's Manual
Engine manual
Operator training material
Certificate of compliance
Note: Determine the left and right sides of the machine
from the normal operating position.
1

Connecting the Battery

Parts needed for this procedure:
A/R Petroleum jelly (not supplied)
Procedure
1. Remove the clips securing the battery cover to the
battery box (Figure
Description
Petroleum jelly (not supplied)
Debris-blower assembly
Hitch
Bolt (3/8 x 3 inches)
Flange nut (3/8 inch)
Hitch clevis
Bolt (5/8 x 4-1/2 inch)
Locknut (5/8 inch)
Hitch pin
Clevis
3).
Qty.
A/R
1
1
2
2
1
2
2
1
1
Qty.
1
Read before operating.
1
1 Use to reference engine operation and maintenance.
1 View before operating the machine.
1 Ensure CE compliance.
1. Battery cover
8
Use
Connect the battery.
Mount the hitch to the debris blower.
Connect the blower to the tow vehicle.
Use
Figure 3
2. Battery clip