Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
Note:
Determine the left and right sides of the machine from the normal operating position.
Description
No parts required
No parts required
Pulley assembly
Pulley-plate mount—for machines with
an aluminum spindle only
Flange nut (3/8 inch)—for machines
with an aluminum spindle only
Belt cover bracket
Carriage bolt (1/4 x 3/4 inches)
Locknut (1/4 inch)
Belt cover bracket
Carriage bolt (1/4 x 3/4 inches)
Locknut (1/4 inch)
Blower assembly
Bagger belt
Blower belt cover
Spring
Qty.
–
Prepare the machine.
Remove the existing belt cover, belt,
–
and bracket.
1
1
Install the pulley assembly and belt.
3
1
Install the new belt cover bracket for
2
48-inch and 52-inch mowers.
2
1
Install the new belt cover bracket for
2
60-inch and 72-inch mowers.
2
1
1
Install the blower, bagger belt, spring,
and belt cover.
1
1
3
Use