Problem Solving; Alternator Precautions; Available Options - Atlas Copco XA186 Dd Instruction Manual

6.

PROBLEM SOLVING

It is assumed that the engine is in good condition and that there is
adequate fuel flow to the filter and injection equipment.
An electrical fault must be traced by an electrician.
Make sure that the wires are not damaged and that they are clamped
tight to their terminals.
7.

AVAILABLE OPTIONS

The XA186 Dd, XAS186 Dd, XATS156 Dd, XAHS146 Dd and XAVS136 Dd can be delivered with following options:
Vessel type:
Towing bar:
Without towing bar:
Towing eyes:
Towbar support:
Road signalisation:
Air quality equipment:
Generator (D):
Safety:
Refinery equipment:
Cold start:
Customer colour:
A. Series 6 units meet your local safety regulations and are available with overrun and parking brakes.
B. Reflectors and lights for safety on the road.
C. Quality air through the aftercooler, reheater and fine filters.
D. Simultaneous electric and pneumatic power.
EURO
ASME
Adjustable with brakes (A1)
Fixed with brakes (A2)
Fixed without brakes
Support (without undercarriage)
Atlas Copco
DIN
Ball
Italian
NATO
Leg
Jockey wheel
Full (B)
Aftercooler + water separator
Aftercooler + water separator + fine filter
Aftercooler + water separator + fine filter + reheater (C)
Aftercooler + water separator + reheater
Lubricator on 7 bar units
230/400 V-50 Hz
Wheel chocks
Safety cartridge
Spark arrestor
Inlet shut down valve
-20 ¡C (-4 ¡F)
Single
Double
Triple
6.1 A
LTERNATOR PRECAUTIONS
1. Never reverse the polarity of the battery or the alternator.
2. Never break any alternator or battery connections while the
engine is running.
3. When recharging the battery, disconnect it from the alternator.
Before using booster cables to start the engine, be sure of the
polarity and connect the batteries correctly.
4. Never operate the engine without the main or voltage sensing
cables connected in the circuit.
I M
NSTRUCTION ANUAL
25