Maintenance; Use Of Service Paks; Preventive Maintenance Schedule For The Compressor - Atlas Copco XA186 Dd Instruction Manual

4.

MAINTENANCE

4.1 U
SE OF SERVICE PAKS
Service Paks include all genuine parts needed for normal
maintenance of both compressor and engine.
Service Paks minimise downtime and keep your maintenance budget
low.
Order Service Paks at your local Atlas Copco dealer.
M
AINTENANCE SCHEDULE
Service pak
XA(S) and XATS
Service pak
XAHS and XAVS
Engine oil level
Compressor oil level
Water level (3) (5)
Air filter vacuator valves
Fuel filter water drain
Air intake vacuum indicators
Electrolyte level and terminals of battery
Tyre pressure
Leaks in air-, oil- or fuel system
Oil cooler
Water cooler
Intercooler
Engine minimum and maximum speeds
Torque of wheel nuts
Brake system (if installed)
Safety valve
Door Hinges
Towing eye shaft or ball coupling
and its shaft
Shut-down switches
Pressure drop over separator element (2)
Fan V-belts (3)
Fueltank
Compressor oil
Compressor oil filter
Air filter elements (1)
Engine oil (3) (4)
Engine oil filter (3)
Fuel prefilter (3)
Fuel filter (3)
Engine inlet and outlet valves (3)
Inspection by Atlas Copco
Service technician
(1) More frequently when operating in a dusty environment.
(2) Replace the element when the pressure drop exceeds 0.8 bar.
(3) Refer to the Deutz operation manual.
(4) 500 hours only valid when using PAROIL SAE 15 W 40.
Keep the bolts of the housing, the lifting eye, the towbar and the axle securely tightened.
Refer to ÔTechnical specificationsÕ for the torque values.
Daily Initially
around 50 hours
supplied with unit
supplied with unit
Check
Check
Check
Empty
Drain
Check
Check
Check
Check
Check
Check
Check/Adjust
Adjust
Replace
Change
Replace
Replace
Replace
Adjust
(5)
4.2 P
REVENTIVE MAINTENANCE SCHEDULE FOR THE
COMPRESSOR
The schedule contains a summary of the maintenance instructions.
Read the respective section before taking maintenance measures.
When servicing, replace all disengaged packings, e.g. gaskets,
O-rings, washers.
For engine maintenance refer to Engine Operation Manual.
The maintenance schedule has to be seen as a guideline for units
operating in a duty environment typical to compressor applications.
Maintenance schedule can be adapted depending on application
environment and quality of maintenance.
Normal
or every 500 hours or every 1000 hours
2912 4306 05
2912 4306 05
Check
Check
Check
Clean
Clean
Clean
Check
Check
Check/Adjust
Grease
Grease
Measure
Adjust
Clean
Change
Replace
Replace
Check additive concentration every 500 h.
Change coolant every 1000 h.
I M
NSTRUCTION
Yearly Remarks
2912 4307 06
2912 4309 06
Check
Check
Check
Clean
Clean
Clean
Check
Check
Check/Adjust
Test
Grease
Grease
Check
Replace
Adjust
Clean
Change
Replace
Replace
Change
Replace
Replace
Replace
Adjust first adjustment
ANUAL
17