Directives 2014/35/Eu (Low Voltage Directive) And 2011/65/Eu (Rohs Directive); Manufacturer's Liability - Kendrion EEX Series Operating Instructions Manual

1.4.2 Directives 2014/35/EU (Low Voltage Directive) and 2011/65/EU (RoHS Directive)

We hereby declare that the products below, specifically the product versions brought into circulation, have
been designed and built in accordance with the requirements of Directives 2014/35/EU (Low Voltage Directive)
and 2011/65/EU (RoHS Directive). The products are classified as category 11 equipment subject to Directive
2011/65/EU (RoHS Directive). This declaration will cease to be valid if modifications are made to the product
without prior permission from the manufacturer.
Manufacturer: Kendrion (Villingen) GmbH
Wilhelm-Binder-Str. 4-6
78048 Villingen-Schwenningen
Germany
Applied harmonized standards and other technical standards and regulations:
EN 60529
DIN VDE 0580
EN 60079-0:2012/A11:2013
IEC 60079-0:2011 (modified) + IS1:2013
EN 60079-1:2014
IEC 60079-1:2014
EN 60079-7:2015
IEC 60079-7:2015
EN 60079-31:2014
IEC 60079-31:2013
Product: Electromagnetically released spring-applied single-disc brake
Types: 76 14G10B00 76 16G10B00 76 24G10B00 76 26G10B00
76 14G11B00 76 16G11B00 76 24G11B00 76 26G11B00
76 14G13B00 76 16G13B00 76 24G13B00 76 26G13B00
76 14G16B00 76 16G16B00 76 24G16B00 76 26G16B00
76 14G19B00 76 16G19B00 76 24G19B00 76 26G19B00
76 14G24B00 76 16G24B00 76 24G24B00 76 26G24B00
Kendrion (Villingen) GmbH

1.5 Manufacturer's liability

The manufacturer will not assume any responsibility for damage caused by failure to use the products in
accordance with their intended use or by failure to observe safety information and other instructions provided
in this manual. The information in this manual was correct and up-to-date before going to print. The information
contained herein shall not entitle users to raise claims with respect to components purchased at an earlier
date.
Person authorized: Dominik Hettich
Enclosure protection ratings
Electromagnetic devices and components
Explosive atmospheres –
Part 0: Equipment – General requirements
Explosive atmospheres –
Part 1: Equipment protection by flameproof enclosures "d"
Explosive atmospheres –
Part 7: Equipment protection by increased safety "e"
Explosive atmospheres –
Part 31: Equipment dust ignition protection by enclosure "t"
Villingen Authorized signatory: .......................................................
13/03/2020
Operating Instructions BA 76..G..B00 // Last updated: 13/03/2020 // Page 6 of 34
Kendrion (Villingen) GmbH
Wilhelm-Binder-Str. 4-6
78048 Villingen-Schwenningen
Germany
Dominik Hettich
(Head of Development)