General Information; Introduction; Standards And Directives; Ec Declaration Of Conformity - Kendrion 76..P..B00 Series Operating Instructions Manual

1. General information

1.1 Introduction

These Operating Instructions describe the operating principle and features of the 76 ..P..B00 series of
Kendrion Binder spring-applied brakes. The safety information provided in this manual must be strictly
observed during the set-up of the machine (e.g. motor) and during the start-up, operation and maintenance
of the spring-applied brake. Should any queries arise with respect to torques, torque variations, installation
position, wear, wear reserve, switching work, break-in conditions, release range, ambient conditions and the
like, please contact Kendrion Binder and ask for clarification before starting to use the brake. Kendrion
Binder spring-applied brakes in the 76 ..P..B00 series are not ready-to-use devices, but are intended to be
incorporated into or assembled with other equipment.

1.2 Standards and directives

The state-of-the-art spring-applied brakes have been designed, built and tested in accordance with the
requirements of DIN VDE 0580 concerning electromagnetic devices and components. The brakes are
intended for use in dust hazardous atmospheres and areas that are susceptible to firedamp. Brake versions
protected to IP 56 are only designed for use in atmospheres susceptible to firedamp. The brakes are
approved to the ATEX Directive (94/9/EC).
dust and firedamp protection I
Approvals:
I M2; Ex de I
II 2D Ex tD A21 IP67 T100°C
DMT 02 ATEX E 122 X
Being classified as "electromagnetic components", spring-applied brakes are not subject to the Low Voltage
Directive and must not bear a CE mark of conformity. The user is required to employ suitable switching
devices and controls to ensure use of the brakes in accordance with EMC Directive 2004/108/EC. A CE
mark in accordance with the ATEX Directive (94/9/EC) is affixed to the brakes.

1.3 EC Declaration of Conformity

in accordance with Directive 94/9/EC:
We hereby declare that the products specified below have been developed and manufactured in accordance
with the requirements of Directive 94/9/EC.
Certification authority:
Manufacturer:
Applied standards and directives:
EN 60529
DIN VDE 0580
EN 60079-0:2006
EN 60079-1:2004
EN 60079-7:2007
EN 61241-0:2006
EN 61241-1:2004
Kendrion Binder Magnete GmbH
DEKRA EXAM GmbH
Dinnendahlstr. 9
44809 Bochum
Germany
Kendrion Binder Magnete GmbH
Industrial Drive Systems
Mönchweilerstr. 1
78048 Villingen-Schwenningen
Germany
Enclosure protection ratings
Electromagnetic devices and components
Electrical apparatus for explosive gas atmospheres (General requirements)
Electrical apparatus for explosive gas atmospheres (Flameproof enclosures "d")
Electrical apparatus for explosive gas atmospheres (Increased safety "e")
Electrical apparatus for use in the presence of combustible dust
(General requirements)
Electrical apparatus for use in the presence of combustible dust
(Protection by enclosures "tD")
Operating Instructions 76 ..P..B00
Option: firedamp protection I
I M2; Ex de I
IP56
DMT 02 ATEX E 122 X
EC type approval
DMT 02 ATEX E 122 X
certificate:
Last updated: 30 Dec. 2009 Page 3