Spare Parts And Accessories; Condition At Delivery - Kendrion EEX Series Operating Instructions Manual

Caution!
Whenever inspection and maintenance work is carried out, ensure that
the machine (e.g. motor) is secured against accidental or unintentional start-up.
•
no load torque acts on the shaft.
•
the lock provided to prevent accidental start-up of the machine (e.g. motor) is removed after completion
•
of inspection and maintenance work.
• all friction surfaces are free of grease and oil. An oily or greasy friction disc (5) cannot be cleaned.
no swelling or glazing of the friction lining has occurred.
•

4.2 Spare parts and accessories

Size
Friction disc (5)
S
10
73 24111E00400
11
73 24111E00400
13
73 24116E00400
16
73 24116E00400
19
76 14124E00400 / 76 24124E05400
24
76 14124E00400 / 76 24124E05400
Table 22/1: Spare parts (S) and accessories (A)
Warning!
Maintenance and repair work and adjustments must be performed by the manufacturer or by approved
specialist repair shops only (see Section 13)!

5. Condition at delivery

Upon receipt of the shipment, the brake must be checked for transit damage before storage. Ordered
accessories (mounting screws) are delivered together with the brake. The spring-applied single-disc brake is
delivered ready for mounting with factory-adjusted air gap 's'. The M
Note!
If the brake is not installed immediately upon delivery, it must be stored in a dry, dust-free and vibration-proof
place.
Friction disc with special friction material for increased switching work W.
5)
Designation, order number
Flat seal (9)
S
76 24E11B00044
76 24E11B00044
76 24E11B00044
76 24E11B00044
76 24E11B00044
5)
5) 76 24E11B00044
Operating Instructions BA 76..G..B00 // Last updated: 13/03/2020 // Page 22 of 34
O-ring (16) Mounting screw (10)
S
602633
602633
602635
602635
602637
602637
rated torque is factory-adjusted.
2
A
304046
304046
3040071
304071
304107
304107