Declaration Of Incorporation (In Accordance With Annex Ii, Part 1, Section B Of Machinery Directive 2006/42/Ec) - Kendrion EEX Series Operating Instructions Manual

1.3 Declaration of Incorporation
(in accordance with Annex II, part 1, Section B of Machinery Directive 2006/42/EC)
We hereby declare that the products below comply with the essential health and safety requirements specified
in Annex I of Machinery Directive 2006/42/EC:
Annex I General Principles and Sections 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.5.1
The partly completed machinery must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of Machinery Directive 2006/42/EC. The
relevant technical documentation required for the partly completed machinery has been compiled in
accordance with Annex VII, part B of Machinery Directive 2006/42/EC. The manufacturer undertakes to submit
an electronic copy of the relevant technical documentation compiled for the partly completed machinery if
reasonably requested by national authorities.
Manufacturer: Kendrion (Villingen) GmbH
Wilhelm-Binder-Str. 4-6
78048 Villingen-Schwenningen
Germany
Applied harmonized standards and other technical standards and regulations:
EN 60529
DIN VDE 0580
EN 60079-0:2012/A11:2013
IEC 60079-0:2011 (modified) + IS1:2013
EN 60079-1:2014
IEC 60079-1:2014
EN 60079-7:2015
IEC 60079-7:2015
EN 60079-31:2014
IEC 60079-31:2013
Product:
Electromagnetically released spring-applied single-disc brake
Types: 76 14G10B00 76 16G10B00 76 24G10B00 76 26G10B00
76 14G11B00 76 16G11B00 76 24G11B00 76 26G11B00
76 14G13B00 76 16G13B00 76 24G13B00 76 26G13B00
76 14G16B00 76 16G16B00 76 24G16B00 76 26G16B00
76 14G19B00 76 16G19B00 76 24G19B00 76 26G19B00
76 14G24B00 76 16G24B00 76 24G24B00 76 26G24B00
Kendrion (Villingen) GmbH
Person authorized
to compile the
documentation:
Enclosure protection ratings
Electromagnetic devices and components
Explosive atmospheres –
Part 0: Equipment – General requirements
Explosive atmospheres –
Part 1: Equipment protection by flameproof enclosures "d"
Explosive atmospheres –
Part 7: Equipment protection by increased safety "e"
Explosive atmospheres –
Part 31: Equipment dust ignition protection by enclosure "t"
Villingen Authorized signatory: .......................................................
13/03/2020
Operating Instructions BA 76..G..B00 // Last updated: 13/03/2020 // Page 4 of 34
Dominik Hettich
Kendrion (Villingen) GmbH
Wilhelm-Binder-Str. 4-6
78048 Villingen-Schwenningen
Germany
Dominik Hettich
(Head of Development)