Spare Parts And Accessories; Condition At Delivery; Emissions; Noise - Kendrion 76..P..B00 Series Operating Instructions Manual

4.2 Spare parts and accessories

Size
Friction disc (5)
Type
10
73 24111E00400
11
73 24111E00400
13
73 24116E00400
16
73 24116E00400
19
76 14124E00400 / 76 24124E05400
24
76 14124E00400 / 76 24124E05400
Table 21/1: Spare parts (S) and accessories (A)
1)
Friction disc with special friction material for increased switching work W
Warning!
Maintenance and repair work and adjustments must be performed by the manufacturer or by
authorised repair shops (see Section 12) only!

5. Condition at delivery

Upon receipt of the shipment, the spring-applied brake must be checked for transit damage before storage.
Ordered accessories (e.g. fixing screws) are delivered together with the brake. The spring-applied single-disc
brake is delivered ready for mounting with factory-adjusted M
Note!
If the brake is not installed immediately upon delivery, it must be stored in a dry, dust-free and vibration-proof
place.

6. Emissions

6.1 Noise

The spring-applied single-disc brake produces switching noise during engagement and release. The noise
level is determined by the installation conditions, circuitry (e.g. with overexcitation) and air gap. Depending
on the installation position, operating conditions and quality of the friction surfaces, clearly audible vibrations
(squeaking) may be produced during braking.

6.2 Heat

Braking operations and gradual heating of the field coil cause the solenoid housing temperature to increase
substantially. Under adverse conditions, the surface temperature may rise to well over 100°C.
Caution!
Risk of burns in case of contact with hot surfaces! Suitable covers and hand guards must be installed to
provide protection against accidental contact.
Kendrion Binder Magnete GmbH
Designation, order number
Flat seal (9)
S
76 24E11B00044
76 24E11B00044
76 24E11B00044
76 24E11B00044
1)
76 24E11B00044
1)
76 24E11B00044
Operating Instructions 76 ..P..B00
O-ring (16)
S S
602633
602633
602635
602635
602637
602637
rated torque and factory-adjusted air gap 's'.
2
Last updated: 30 Dec. 2009
Fixing screw (10)
A
304046
304046
3040071
304071
304107
304107
Page 21