Quick Start - Stage XPD1 Wireless System
1.
Plug the RXD1 USB receiver into the USB
jack labeled STAGE XPD1 WIRELESS.
2.
On the belt pack transmitter, open the
bottom section of the microphone.
Place a fresh set of AA (LR6) batteries
in the transmitter battery holder, taking
care to observe the polarity markings,
then close the cover.
3.
Turn the WIRELESS LEVEL
knob on the XP106 completely
counterclockwise to 0, then turn the
POWER siwtch on the XP106 to the
ON position.
4.
Turn on the power to the transmitter by
pressing and holding Power switch; the
indicator LED will light amber.
XP106 • Portable PA System
13