Quick Start - Samson Expedition XP208w Owner's Manual

Quick Start

Bluetooth®
1. Turn the BLUETOOTH VOLUME control down
counterclockwise to 0.
2. With the XP208w and your Bluetooth device
powered on; press the PAIR button on the
rear panel of the XP208w to make the
speaker discoverable. The Bluetooth indicator
will slowly flash blue.
3. In the settings of your Bluetooth device, set it
to "discover" available devices.
4. From the Bluetooth device list, select the
"SAMSON BLUETOOTH" device.
5. If your device asks for a passkey, enter digits
0000 (four zeros) and press OK. Some
devices may also ask you to accept the
connection.
6.
The XP208w speaker indicates that pairing is complete when the indicator turns steady
blue. You can now stream audio from your device to the XP208w speakers.
7.
With the volume control on your Bluetooth device turned up, play some music, and
slowly raise the XP208w BLUETOOTH VOLUME control until you have reached the
desired level.
Using the Master EQ
The XP208w feature a 2-band equalizer allowing
you to adjust the systems overall high and low
frequencies. The frequency response is flat
when the knobs are in the vertical or 12 o'clock
position. Small movements of the controls can
make a big difference. Turning the controls all the
way up can cause distortion. Use your ears when adjusting the EQ to fit your application. We
have provided two example settings to help you get started fine tuning your system.
1. Setting the EQ for Music
If you are using the XP208w for music playback, turn up the BASS and TREBLE
slightly to produce a "hi-fi" frequency response that accentuates the low and high
ranges.
2. Setting the EQ for Vocal
If you are using your XP208w with a microphone for speech only, you can reduce the
BASS and raise the TREBLE slightly, which will produce a frequency response that
accentuates the vocal range.
10