Keep It Clean; Cleaning The Body; Cleaning The Underbelly - Worx Landroid WG795E Original Instructions Manual

When storing, lay the Landroid
out of icy weather. It is suggested to store your Landroid
original box. It is best to put the Charging Base, Low Voltage Cable
(4), and Transformer (22) indoors over the winter season as well (See
Fig. M).
The Boundary Wire can be left in the ground although its ends
should be protected, such as placed in a tin can with grease. If the
Charging Base is left outside for winter, leave the Boundary Wire
connected.
NOTE: Before storing for winter, you can take your Landroid
dealer for a thorough cleaning and tune-up, where its functions will
be tested and worn parts will be replaced.
When bringing the Landroid
make sure the Charging Strips (5) and Contact Pins (2) are clean, it is best to use a fine grade emery cloth. Then make sure
the date and time are correct and send the Landroid

5.3 Keep it clean

WARNING: Before cleaning turn your Landroid
on protective gloves before cleaning the Blade Disc (16) and do not use running water.
(See Fig. J, K, L)
A. Cleaning the body
®
Your Landroid will live a much happier and longer life if it is cleaned regularly. Although, as your Landroid
machine, you will need to take care when cleaning, so DO NOT use a hose or otherwise pour running water on your
®
Landroid , it is best to use a spray bottle filled with water. When cleaning the Mould Plastic Housing (10) use a soft brush
or clean cloth and avoid using solvents or polishes (See Fig.N). Lastly, make sure that you remove all build up of grass
clippings and debris, especially from the motor cooling vents.
14
N
B. Cleaning the underbelly
Again, it is important that you power the Landroid
Button wear protective gloves before touching the Blade Disc
(16).
First, turn your Landroid
see the Blade Disc (a), the surrounding Motor Frame Box (b) (14), and the
Front (18) and Drive (11) Wheels. Clean everything thoroughly with a soft
brush or moist rag (See Fig. O).
Rotate the Blade Disc to make sure it moves freely and that there is not
anything lodged between it and the surrounding Motor Frame Box. Also,
make sure the Blades are able to spin freely and that there's no grass
obstructing them.
IMPORTANT: Remove any lodged debris so that it does not
cause a crack in the Blade Disc. Even the tiniest crack can
decrease your Landroid's mowing output.
Lawn Mowing Robot
®
flat on all four wheels in a dry place
®
back to life after winter hibernation,
®
OFF using the ON/Off
®
on its side to expose its underbelly. Here you will
®
in its
®
to a
M
®
back to what it loves doing: mowing.
® OFF by pressing the ON/OFF Button to OFF. Put
(a)
O
®
is an electric
(b)
EN