How Does My Landroid Know Where To Go; Finding The Charging Base; Rain Sensors; Sensing The Boundary Wire - Worx Landroid WG795E Original Instructions Manual

3.2 how does my Landroid
®
Your Landroid is capable of doing things on its own. The Landroid
knows when it needs to go to its Charging Base (3) to charge, can
sense when it is raining, can stop itself if it senses a problem, and
knows to stop and turn around when it bumps into something
blocking its path, such as a person, pet, or other object. The
®
Landroid will also automatically stop its Blade Disc (16) from
rotating if it is lifted off the ground to prevent an accident.
A. Finding the charging base
When your Landroid
follow the Boundary Wire (23) in an anti-clockwise motion back to its
Charging Base. To save energy, the Landroid
its Blade Disc (16) when returning to its Charging Base.
B. Rain sensors
®
The Landroid has a Rain Sensor (12) at its rear that will sense rain
drops and tell the Landroid
Wire back to its Charging Base (See Fig. B).
®
The Landroid will automatically check to see if it is still raining
depending on the time (0 – 180 min) you have set for the "Rain
start delay" function during programming. If it sees that the rain
has stopped, it will return to mowing. If you want to command your
®
Landroid to go ahead and start mowing again before the time you
have set under the "Rain start delay" function, then press the Access
Button (8), dry the Landroid
to tell it to mow again (See Fig. D, E). See the Programming and
Troubleshooting Guide for more details.
C. Sensing the boundary wire
®
The Landroid always obeys the border set by the Boundary Wire
10
and uses two sensors at its front to sense when it is getting close.
Before changing direction, the Landroid
*This is the recommended distance, because the Landroid
gauge to ensure proper installation.
D. Starting and stopping while mowing
If you would like to command the Landroid
When pressed, the Landroid
again until you have closed its Keypad Window (See Fig. D, E).
D
Lawn Mowing Robot
®
needs to recharge, it will stop mowing and
®
chooses not to rotate
®
to stop mowing and follow the Boundary
®
off, and close the Keypad Window (9)
®
will overrun the Boundary Wire around 25cm* (See Fig. C).
®
to stop mowing, then simply press the Access Button (8) on top of the mower.
®
will open its Keypad Window and await your further commands. It will not begin mowing
®
know where to go?
®
B
C
®
cannot calculate the distance itself. Use the provided distance
E
EN