Worx WG790E Programming Manual

Programming guide
Control Panel and menu
HOME
Sends the Landroid M to its
®
charging base during operation
and activates charging
START
Shortcut key to start mowing.
NUMBER PAD
Input numbers to set
time, date
STOP
To stop the Landroid M during
®
normal operation and charging.
Menu overview
Programming
After you have successfully installed the Landroid
follow the step by step guide below.
Start
To quick start your Landroid M, first press
®
is the shortcut button to command your Landroid
Landroid M go back for charging and mow the grass near boundary wire at the same time. The Landroid
®
return to the charging base. Once charging is complete, the Landroid
The factory default setting is 800m 2
If you want to change the working time and other settings, please follow the steps below.
Setting
OK
Press to enter the submenu. Use the
1. General setting (
HOMEPAGE
M, it is now ready to be programmed according to your schedule. To program your Landroid
®
until the Landroid M turns on and input the default PIN 0000, then press
®
M to start mowing. Press
®
M will automatically resume mowing or if it has finished mowing it will stay in the charging base.
®
– refer to the Auto Mowing Time Schedule. if the time is not in the schedule, press START and close cover to start.
keys to select General setting, Working time or Security. Then press OK.
)
HOMEPAGE
Displays the state of your setting
POWER ON/OFF
Turns the Landroid M on and off
®
RETURN
Back to proceeding menu
Select up
Select down
OK
Confirms any setting.
Note: Make sure you
confirm your selection
within 30 secs or the
display will return to
previous menu.
General Setting
Working Time
Security
and close the cover to keep working and press
M will work continuously until it's out of battery and then it will
®
Always close the panel cover after
programming, your Landroid
will not move with it open.
Language
Time Format
Date Format
Set Date & Time
Rain Start Delay
Auto Work Time
Customize Work Time
Customize Work Area
Enable boundary cut
Change PIN Code
Alarm Level
M, simply
®
.
and close the cover to make
M
®