Unmuting Touch-Tone; Activating Pocket Pagers - ACC RC-85 Owner's Manual

Hints: Return to VFO from memory operation by entering the
frequency as mhtof.
Subaudible tone and memory information are not stored
in Macro Sets - only mhtof frequency.
Related Commands:
Config Link / Remote Base Command Code Prefix
Control Op User Command E/D

Unmuting Touch-Tone

At times it is desirable to pass Touch-Tone sequences through the repeater or
through to the phone line unmuted, without them being decoded by the RC-85
controller. For example, bringing up an autopatch on a repeater accessed
through the remote base would require passing tones through the controller to
the linked repeater. Another application would be passing a credit card number
or Sprint / MCI code through to the phone line.
Command: # (sequence)
Example: Pass MCI code and long distance phone number through to
the phone line after an autopatch to the local MCI
number.
User sends "# 54321 408 555 1234" all during one
transmission. Controller unmutes after the # and allows
the MCI code and phone number to pass unmuted,
while ignoring the sequence.
Hint: Be sure to send the # at the beginning of each transmission
that you want unmuted.
If you would like all Touch-Tones to be unmuted and
would like the controller to decode the commands,
use the Control Op selectable "Touch-Tone Unmute"
mode.

Activating Pocket Pagers

The RC-85 controller can generate two-tone paging tones in response to Touch-
Tone commands entered from over the air or phone. These tones can activate
pocket pagers, and the capability offers an excellent selective calling system.
The tones are based on Motorola standard frequencies and timing. Both one
second / three second two-tone and eight second group call tones can be
generated.
The paging command consists of the paging prefix followed by the group number
and tone number of each of the two sequential tones.
Commands: (Paging Prefix)(A Group #)(A Tone #)(B Group #)(B Tone #)
(Paging Prefix)(Group #)(Tone #) [group call]
(User's Features)
RC-85 Repeater Controller Owner's Manual
5 - 14 V3 4/87