User Commands; Control Operator Commands - ACC RC-85 Owner's Manual

User Commands

There are 13 classes of User commands, each with its own independent
command code. User command codes consist of a prefix followed immediately by
a command root. The prefix may be remotely programmed by the repeater
owner using Configuration commands, while the command roots contain
information related to the action desired. For example, if the User Loadable
Autodial prefix is *, dialing autodial location 45 is done by entering the
command *45. The * is the prefix, and is remotely changeable, while 45 is the
root, which specifies the autodial location being called.
The User command code classifications include:
Touch-Tone Pad Test
Autopatch
User Loadable Autodial
Emergency Autodial
Patch Utilities (Cover Tone, Custom Hangup,
Timer Extend, Reverse Patch Answer, Redial)
Patch Hangup
User Loadable Autodial Load / Erase
Reverse Patch
S-Meter Readback
Demonstration / Bulletin Board Messages
Link / Remote Base
Paging
Touch-Tone Access Mode Up / Down
Spare Audio Select
User Function Remote Control Outputs
Telephone Timer Extend
Each User command classification may have an independent command code
prefix, and codes may be changed at any time remotely by the repeater owner.
The operation of each the user commandable functions is described in the next
chapter of the manual.

Control Operator Commands

Control Operator commands, those that enable and disable various repeater
functions, and select operational modes consist of a command prefix which may
be programmed by the repeater owner remotely with Configuration commands
followed by a one or two digit root code. The command prefix may consist of
between 1 and 7 digits so that Control Op commands may be made as secure as
is necessary in your system. Control Op commands may be between 2 and 9 long
- easy or secure, it's up to you.
Control Operator selections may be grouped into four "Macro Sets". That is,
most of the enable / disable and mode selections can be grouped together and
(Command Code Structure)
RC-85 Repeater Controller Owner's Manual
4 - 2 V3 4/87